Showing posts with label ICAO. Show all posts
Showing posts with label ICAO. Show all posts

Monday, April 12, 2010

Aviation Call Sings

from Wikipedia

Aviation Call Sings

A general aviation aircraft in the United States with its call sign (N978CP) displayed on the fuselage.
Call signs in aviation are derived from several different policies, depending upon the type of flight operation and whether or not the caller is in an aircraft or at a ground facility. In most countries, unscheduled general aviation flights identify themselves using the call sign corresponding to the aircraft's registration number (also called N-number in the U.S., or tail number). In this case, the call sign is spoken using the International Civil Aviation Organization (ICAO) phonetic alphabet. Aircraft registration numbers internationally follow the pattern of a country prefix, followed by a unique identifier made up of letters and numbers. For example, an aircraft registered as N978CP conducting a general aviation flight would use the call sign November-niner-seven-eight-Charlie-Papa.
In most countries, the aircraft call sign or "tail number" or registration marks are linked to the international radio call sign allocation table and follow a convention that aircraft radio stations (and, by extension, the aircraft itself) receive call signs consisting of five letters. For example, all British civil aircraft have a five-letter call sign beginning with G. Canadian aircraft have a call sign beginning with C–F or C–G, such as C–FABC. Wing In Ground-effect vehicles (hovercraft) in Canada are eligible to receive C–Hxxx call signs, and ultralight aircraft receive C-Ixxx call signs. In days gone by, even American aircraft used five letter call signs, such as KH–ABC, but they were replaced prior to World War II by the current American system of aircraft call signs (see below).
The – (dash) in the registration is only included on the fuselage of the airplane for readability. In air traffic management systems (ATC radar screen, flow management systems, etc.) and on flight plan forms, the dash is not used (e.g. PHVHA, FABCD, CFABC).
After an aircraft has made contact with a air traffic control facility, the call sign may be abbreviated. Sometimes the aircraft make or model is used in front of the full or abbreviated call sign, for instance, the American aircraft mentioned above might then use Cessna Eight-Charlie-Papa. Alternatively, the initial letter of the call sign can be concatenated with the final two or three characters, for instance a British aircraft registered G–BFRM may identify as Golf–Romeo–Mike while the American aircraft might use November–Eight-Charlie-Papa. The use of abbreviated call signs has its dangers, in the case when aircraft with similar call signs are in the same vicinity. Therefore abbreviated signs are used only so long as it is unambiguous. [6]
The United States does not follow the five-letter call sign convention, and in that country the registration number begins with the letter N followed by up to five digits and/or letters in one of these schemes: one to five numbers (N12345), one to four numbers and one suffix letter (N1234Z), or one to three numbers and two suffix letters (N123AZ). The numeric part of the registration never starts with zero. To avoid confusion with the digits 1 (one) and 0 (zero), the alphabetic letters I (India) and O (Oscar) are not used in registration numbers.
Commercial operators, including scheduled airline, air cargo and air taxi operators, will usually use an ICAO or FAA-registered call sign for their company. By ICAO Annex 10 Chapter 5.2.1.7.2.1 - Full call signs type c, a call sign consists out of the telephony designator of the aircraft operating agency, followed by the flight identification. The flight identification is very often the same as the flight number, but could be different due to call sign confusion, if two or more flights close to each other have similar flight numbers (i.e. KL649 and KL645 or BA466 and BA646). For example, British Airways flight 75 would use the call sign Speedbird Seven–Five (with the last word properly pronounced fife), since Speedbird is the telephony designator for British Airways and 75 would be the flight identification. (The telephony designator is not the same as the call sign, although the two are sometimes conflated). Pan Am had the telephony designator of Clipper. (see list)
For these call signs, proper usage varies by country. In some countries, such as the United States, numbers are spoken normally (for the example above, Speedbird Seventy-five) instead of being spelled out digit by digit, leading to the possibility of confusion. In most other countries, including the United Kingdom, they are spelled out. [7] Air taxi operators in the United States sometimes do not have a registered call sign, in which case the prefix T is used, followed by the aircraft registration number (e.g. Tango- November-Niner-Seven-Eight-Charlie-Papa).
Some variations of call signs exist to express safety concerns to all operators and controllers monitoring the transmissions. Aircraft call signs will use the suffix "heavy" for large aircraft, to indicate an aircraft that is going to cause significant wake turbulence, e.g. United Two-Five Heavy; All aircraft capable of operating with a gross take-off weight of more than 255,000 lbs. must use this suffix whether or not they are operating at this weight during a particular phase of flight. These are typically Boeing 747, some models of the 757, 777, or 767, Airbus A340, A330 and A300, McDonnell Douglas DC-10 or MD-11, or Lockheed L-1011 aircraft. The suffix "super" is used for the Airbus A380.[8] For air ambulance services or other flights involving the safety of life (such as aircraft carrying a person who has suffered a heart attack), "lifeguard" is added to the call sign. For flights in which life is not in direct danger (such as transporting organs for transplant), the call sign prefix "Pan-Pan-Medical" is used before the normal call sign, e.g. Pan-Pan-Medical Three-Three-Alpha, Pan-Pan-Medical Northwest Four-Five-Eight, or Pan-Pan-Medical Singapore Niner-Two-Three. Pan Pan (pronounced "pon-pon") is the voice radio signal for "urgent", while Mayday is the voice radio signal for "distress". The word may be omitted for air ambulance services with assigned call signs, especially when they have notified air traffic control operators that they are on an air ambulance mission at the beginning of their flight and do not change from one controller to another. The Life Flight air ambulance service, for example, might simply identify as Life-Flight Three. An aircraft that has declared an in-flight emergency will sometimes prefix the word Mayday to its call sign. [1]
Formerly one of the rarest call signs, "Concorde", was once used to identify British Airways Concorde aircraft. The intent of this call sign was to raise the air traffic control operators' awareness of the unique performance of the aircraft and the special attention it required. The call sign was appended to British Airways' normal radio call sign, e.g. "Speedbird-Concorde One"[9]. In normal service, Air France did not use it at all; its Concorde flights simply used the standard Airfrans call sign.[citation needed]
Glider pilots often can use any of three different call signs. Since most (not all) gliders now show standard CAA general aviation registrations e.g. G-xxxx they can call using the same call sign and abbreviation rules as other light aircraft. Before these registrations came in (between 2004 - 2008) they used to use and normally still do use either a three letter code issued to all gliders by the British Gliding Association know as the aircraft's Trigraph e.g. XYZ normally calling ATC as "Glider X-ray, Yankee, Zulu" or if they paid extra could get from the BGA a numeric or mixed numeric and letter code known as a competition number for marking their aircraft and as a call sign. For Example R4 "Romeo Four", or 26 "Two Six" or F1 "Foxtrot One". Optionally gliders will normally tag on the "Glider" in front of their call sign when calling ATC units so that the controller knows for example that the glider will be unable to maintain a particular height as Gliders are normally either descending in a straight glide or circling to climb. Some gliders are still not required to carry a CAA General Aviation type registration as they are older designs or prototypes and can therefore only continue to just use their Trigraph or Competition number as a call sign. These are known as Annex II aircraft as they are listed in EASA Annex II.
Military flights often use more than one call sign during a flight. Administrative call signs are used with air traffic control facilities similar to those of commercial operators. e.g. Navy Alpha-Golf-Two-One, Reach-Three-One-Seven-Niner Two.
Tactical call signs are used during tactical portions of a flight, and they often indicate the mission of the flight and/or an aircraft's position in a formation.
For example, Canadian Air Force 442 Rescue Squadron, based at Comox, British Columbia uses the call sign "Snake 90x" depending on the tail number of the helicopter: 901, 902, etc. When tasked on a search and rescue (SAR) mission, however, the aircraft call sign becomes "Rescue 90x".
Ground facilities identify themselves by the name and function of the facility: e.g. Seattle Tower for the tower air traffic control operators' position, SoCal Approach for a TRACON, or Boston Center for an Area Control Center. All other ICAO countries around the world, for example the European Joint Aviation Authorities (JAA), use 'Control or Radar instead of Center in their airspace. (Langen Radar, Brussels Control, Paris Control, ...).
The ICAO 24–bit transponder code is intended for non-human usage in the Mode-S and ADS-B protocols.
Marine Callsign: WD9598 was used in the 1960's TV show flipper, by Portar Ricks.

FAA Aircraft Identification regulations

The Federal Aviation Administration regulates call sign standards within United States airspace. These conventions are generally used world wide.[10]
position call sign comments
President of the United States Air Force One any US Air Force aircraft when the president is aboard, typically VC-25A aircraft, Executive One Foxtrot when only the family of the president is aboard.
President of the United States Marine One any Marine aircraft when the president is aboard, typically VH-60N or VH-71 Kestrel helicopters, Executive One Foxtrot when only the family of the president is aboard.
President of the United States Navy One any Navy aircraft when the president is aboard, to date this call sign has been used only once[11]
President of the United States Executive One any civilian aircraft when the president is aboard, Executive One Foxtrot when only the family of the president is aboard.
Vice President of the United States Air Force Two any US Air Force aircraft when the vice president is aboard
Vice President of the United States Marine Two any US Marines aircraft when the vice president is aboard
United States Secretary of Transportation Transport One any aircraft when the secretary is aboard, Transport Two when the Deputy Secretary of Transportation is aboard
Administrator of the Federal Aviation Administration Safe Air One any aircraft when the secretary is aboard, Safe Air Two when the Deputy Administrator
United States Department of Energy RAC followed by tail number any Department of Energy Flight

FLIGHT CHECK followed by tail number any flight testing navigational aids

SAMP followed by tail number any United States Air Force aircraft conducting air sampling
Canadian Forces Air Command CANFORCE followed by tail number Canadian Air Force flights

Wednesday, February 3, 2010

Type rating

Type rating

A type rating is an allowance to fly a certain aircraft model that requires additional training beyond the scope of initial license and aircraft class training. What aircraft require a type rating is decided by the local aviation authority. In many countries pilots of single-engined aircraft under a certain maximum weight (5,700 kg or 12,500 lb, typically) do not require a type rating for each model, all or most such aircraft being covered by one class rating instead. There are exceptions to this, e.g. under Joint Aviation Authorities (JAA) regulations the piston version of the Piper Malibu does require its own type rating. In New Zealand and South Africa there is no class rating, each aircraft model requiring its own rating. Countries which have adopted the class rating system for small aircraft typically require additional training and license endorsement for complexity features such as conventional undercarriage (tailwheels), variable pitch propellers, retractable undercarriage, etc.

Starting in 2006, the FAA in the United States requires co-pilots (second-in-command, or SIC) to have a 'SIC Type Rating' for aircraft requiring a crew of two, and otherwise requires a type rating to act as pilot-in-command (PIC) to fly internationally, or over international airspace. This is in order to remain compliant with ICAO. This is outlined in 14 CFR 61.55. Such a type rating is NOT required for operations completely within the United States. Obtaining a SIC Type Ratings is significantly less rigorous than obtaining a 'full' or PIC type rating.

An instrument rating is required for some type rating

References

External Links

http://www.iftc.aero

Wednesday, October 29, 2008

NATO phonetic alphabet

From Wikipedia, the free encyclopedia

FAA radiotelephony phonetic alphabet and Morse code chart.

The NATO phonetic alphabet, more formally the international radiotelephony spelling alphabet, is the most widely used spelling alphabet. Though often called "phonetic alphabets", spelling alphabets have no connection to phonetic transcription systems like the International Phonetic Alphabet. Instead, the NATO alphabet assigns code words to the letters of the English alphabet acrophonically (Alfa for A, Bravo for B, etc.) so that critical combinations of letters (and numbers) can be pronounced and understood by those who transmit and receive voice messages by radio or telephone regardless of their native language, especially when the safety of navigation or persons is essential. The paramount reason is to ensure intelligibility of voice signals over radio links.

International

Adoption

After this spelling alphabet was developed by the International Civil Aviation Organization (ICAO) (see history below) it was adopted by many other international and national organizations, including the North Atlantic Treaty Organisation (NATO), the International Telecommunication Union (ITU), the International Maritime Organization (IMO), the Federal Aviation Administration (FAA), and the American National Standards Institute (ANSI). It is a subset of the much older International Code of Signals (INTERCO), which originally included visual signals by flags or flashing light, sound signals by whistle, siren, foghorn, or bell, as well as one, two, or three letter codes for many phrases.[1] The same alphabetic code words are used by all agencies, but each agency chooses one of two different sets of numeric code words. NATO uses the regular English numeric words (Zero, One, with some alternative pronunciations), whereas the IMO uses compound numeric words (Nadazero, Unaone).

NATO

The alphabet's common name (NATO phonetic alphabet) arose because it appears in Allied Tactical Publication ATP-1, Volume II: Allied Maritime Signal and Maneuvering Book used by all allied navies in NATO, which adopted a modified form of the International Code of Signals. Because the latter allows messages to be spelled via flags or Morse code, it naturally called the code words used to spell out messages by voice its "phonetic alphabet". The name NATO phonetic alphabet became widespread because the signals used to facilitate the naval communications and tactics of the United States and NATO have become global.[2] However, ATP-1 is marked NATO Confidential (or the lower NATO Restricted) so it is not publicly available. Nevertheless, a NATO unclassified version of the document is provided to foreign, even hostile, militaries, even though they are not allowed to make it publicly available.

Language

Most of the words are recognizable by native English speakers because English must be used upon request for communication between an aircraft and a control tower whenever two nations are involved, especially when they have different languages. English is not required domestically, thus if both parties to a radio conversation are from the same country, then another phonetic alphabet of that nation's choice may be used.

In most versions of the alphabet, the non-English spellings Alfa and Juliett are found. Alfa is spelled with an f as it is in most European languages. The English and French spelling alpha would not be properly pronounced by speakers of some other languages whose native speakers may not know that ph should be pronounced as f. Juliett is spelled with a tt for native French speakers because they may treat a single final t as silent. In English versions of the alphabet, like that from ANSI or the version used by the British armed forces and emergency services, one or both may revert to their standard English spelling.

Alphabet and pronunciation

The pronunciation of the words in the alphabet as well as numbers may vary according to the language habits of the speakers. In order to eliminate wide variations in pronunciation, posters illustrating the pronunciation desired are available from the ICAO.

Letters

Letter Code word Pronunciation IPA from ICAO (see below)
A Alfa (ICAO, ITU, IMO, FAA)
Alpha (ANSI)
AL FAH ˈælfɑ
B Bravo BRAH VOH ˈbrɑːˈvo
C Charlie CHAR LEE or
SHAR LEE
ˈtʃɑːli or
ˈʃɑːli
D Delta DELL TAH ˈdeltɑ
E Echo ECK OH ˈeko
F Foxtrot FOKS TROT ˈfɔkstrɔt
G Golf GOLF gʌlf
H Hotel HO TELL (ICAO)
HOH TELL (ITU, IMO, FAA)
hoːˈtel
I India IN DEE AH ˈindiˑɑ
J Juliett (ICAO, ITU, IMO, FAA)
Juliet (ANSI)
JEW LEE ETT ˈdʒuːliˑˈet
K Kilo KEY LOH ˈkiːlo
L Lima LEE MAH ˈliːmɑ
M Mike MIKE mɑik
N November NO VEM BER noˈvembə
O Oscar OSS CAH ˈɔskɑ
P Papa PAH PAH pəˈpɑ
Q Quebec KEH BECK keˈbek
R Romeo ROW ME OH ˈroːmiˑo
S Sierra SEE AIR RAH (ICAO, ITU, IMO)
SEE AIR AH (FAA)
siˈerɑ
T Tango TANG GO ˈtængo [sic]
U Uniform YOU NEE FORM or
OO NEE FORM
ˈjuːnifɔːm or
ˈuːnifɔrm [sic]
V Victor VIK TAH ˈviktɑ
W Whiskey WISS KEY ˈwiski
X X-ray or
Xray
ECKS RAY (ICAO, ITU)
ECKS RAY (IMO, FAA)
ˈeksˈrei
Y Yankee YANG KEY ˈjænki [sic]
Z Zulu ZOO LOO ˈzuːluː

Digits

Digit Code word Pronunciation IPA from ICAO
0 Zero (FAA)
Nadazero (ITU, IMO)
ZE RO (ICAO, FAA)
NAH-DAH-ZAY-ROH (ITU, IMO)
—
1 One (FAA)
Unaone (ITU, IMO)
WUN (ICAO, FAA)
OO-NAH-WUN (ITU, IMO)
—
2 Two (FAA)
Bissotwo (ITU, IMO)
TOO (ICAO, FAA)
BEES-SOH-TOO (ITU, IMO)
—
3 Three (FAA)
Terrathree (ITU, IMO)
TREE (ICAO, FAA)
TAY-RAH-TREE (ITU, IMO)
—
4 Four (FAA)
Kartefour (ITU, IMO)
FOW ER (ICAO, FAA)
KAR-TAY-FOWER (ITU, IMO)
—
5 Five (FAA)
Pantafive (ITU, IMO)
FIFE (ICAO, FAA)
PAN-TAH-FIVE (ITU, IMO)
—
6 Six (FAA)
Soxisix (ITU, IMO)
SIX (ICAO, FAA)
SOK-SEE-SIX (ITU, IMO)
—
7 Seven (FAA)
Setteseven (ITU, IMO)
SEV EN (ICAO, FAA)
SAY-TAY-SEVEN (ITU, IMO)
—
8 Eight (FAA)
Oktoeight (ITU, IMO)
AIT (ICAO, FAA)
OK-TOH-AIT (ITU, IMO)
—
9 Nine (FAA)
Novenine (ITU, IMO)
(No 'r' in spellings)
NIN ER (ICAO, FAA)
NO-VAY-NINER (ITU, IMO)
—

Pronunciation

The spelling and pronunciation given is that officially prescribed by the ICAO, ITU, IMO, and the FAA. The ICAO indicates unstressed numeric syllables in lower case (stressed in UPPER CASE), unlike its own alphabet, where stressed syllables are UNDERLINED UPPER CASE (unstressed in UPPER CASE). In the interests of uniformity, the IMO/FAA style of stressed syllables in BOLD will be used here (underlines might be confused with links).

Wherever the agencies (ICAO, ITU, IMO, FAA, ANSI) differ, each agency's preferred pronunciations or spellings are also given in the table. The ICAO, ITU, and IMO give an alternate pronunciation for a couple of letter-words. The FAA gives the alternate pronunciations in one publication as shown by the image on this page, but in other publications it does not. The FAA gives different spellings for their pronunciations depending on the publication consulted. These are from the FAA Flight Services manual (§ 14.1.5) and the ATC manual (§ 2-4-16). ANSI gives English spellings, but does not give pronunciations or numbers. The ICAO, NATO, and FAA use the common English number words (with stress), which are also the second component of the more complex ITU and IMO number words (no stress), but not always pronounced the same.[3][4][5][6][7]

Only the ICAO prescribes any kind of IPA pronunciation (and then only for letters, not numbers).[3] Several of the pronunciations indicated do not occur in current General American English or British Received Pronunciation (ˈʃɑːli, gʌlf, ˈroːmiˑo, ˈuːnifɔrm) or are simplified representations of these (ˈtængo, ˈjænki). The pronunciations indicated are broad transcriptions because many different pronunciations of each code word are allowed in actual use, depending on the language habits of the speakers. Thus only a generic 'e' is indicated, rather than its various shades; 'r' indicates an English r, rather than a trilled r; 'i' indicates either a long or short i. Both the IPA and Latin alphabet pronuncations were developed by the ICAO before 1956 with input from the governments of both the United States and United Kingdom,[8] so the pronunciations of both General American English and British Received Pronunciation are evident, especially in the rhotic and non-rhotic accents. The Latin alphabet version usually has a rhotic accent ('r' always pronounced), as in CHAR LEE, SHAR LEE, NO VEM BER, YOU NEE FORM, and OO NEE FORM, whereas the IPA version usually has a non-rhotic accent ('r' pronounced only before a vowel), as in ˈtʃɑːli, ˈʃɑːli, noˈvembə, and ˈjuːnifɔːm. Exceptions are OSS CAH and ˈuːnifɔrm. The IPA form of Golf implies it is pronounced gulf, which does occur, but not in either General American English or British Received Pronunciation. The Latin alphabet and IPA forms of Bravo have different syllable stresses. The ŋ phoneme ('ng') in the IPA forms of Tango and Yankee is shown as an 'n' and marked [sic]. Furthermore, the pronunciation prescribed for "whiskey" agrees with many (but by no means all) English dialects, in which the "wh-" is simplified into the non-fricative "w-" sound.

Variants

Aviation

  • "Delta" is replaced by "Dixie" or "David" at airports that have a majority of Delta Air Lines flights, such as Hartsfield-Jackson Atlanta International Airport in order to avoid confusion because "Delta" is also Delta's callsign.
  • "Foxtrot" is commonly abbreviated to "Fox" at North American airports and some European ones.

Amateur radio

Amateur radio operators will occasionally use "Italy" instead of "India", "Kilowatt" instead of simply "Kilo", "Norway" instead of "November", "Radio" instead of "Romeo", "Yokohama" instead of "Yankee" and "Zanzibar" or "Zebra" instead of "Zulu".

Other

Many unofficial phonetic alphabets are in use that are not based on a standard, but are based on words the transmitter can easily remember. Often, such ad-hoc phonetic alphabets are first name alphabets based on (mostly) men's names, such as Alan Bobby Charlie David Edward Frederick George Howard Isaac James Kevin Larry Michael Nicholas Oscar Peter Quincy Robert Stephen Trevor Ulysses Vincent William Xavier Yaakov Zebedee, or on a mixture of names and other easily recognizable (and locally understandable) proper nouns, such as U.S. states, local cities and towns, etc. One documented example of this is the LAPD phonetic alphabet.

International maritime signal flagsList of military time zonesProcedure word and voice procedure [edit] External links Most comprehensive collection of phonetic alphabetsPublic ICAO siteSpoken NATO phonetic alphabet - Click the letters to play the wordsPhoneticise.com - online utility for phoneticising textGoogle Gadgets: NATO phonetic alphabet Google Gadget cheat sheetSpell It Out! (Alpha Bravo Charlie) All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.)
Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) tax-deductible nonprofit charity.

Wednesday, September 3, 2008

Airspace classes

From Wikipedia, the free encyclopedia

The world’s navigable airspace is divided into three-dimensional segments, each of which is assigned to a specific class. Most nations adhere to the classification specified by the International Civil Aviation Organization (ICAO) and described below. Individual nations also designate Special Use Airspace, which places further rules on air navigation for reasons of national security or safety.

ICAO definitions

On March 12, 1990, ICAO adopted the current airspace classification scheme. The classes are fundamentally defined in terms of flight rules and interactions between aircraft and Air Traffic Control (ATC). Some key concepts are:

  • Separation: Maintaining a specific minimum distance between an aircraft and another aircraft or terrain to avoid collisions, normally by requiring aircraft to fly at set levels or level bands, on set routes or in certain directions, or by controlling an aircraft's speed.
  • Clearance: Permission given by ATC for an aircraft to proceed under certain conditions contained within the clearance.
  • Traffic Information: Information given by ATC on the position and, if known, intentions of other aircraft likely to pose a hazard to flight.

The classifications adopted by ICAO are:

  • Class A: All operations must be conducted under Instrument Flight Rules (IFR) or Special visual flight rules (SVFR) and are subject to ATC clearance. All flights are separated from each other by ATC.
  • Class B: Operations may be conducted under IFR, SVFR, or Visual flight rules (VFR). All aircraft are subject to ATC clearance. All flights are separated from each other by ATC.
  • Class C: Operations may be conducted under IFR, SVFR, or VFR. All flights are subject to ATC clearance. Aircraft operating under IFR and SVFR are separated from each other and from flights operating under VFR. Flights operating under VFR are given traffic information in respect of other VFR flights.
  • Class D: Operations may be conducted under IFR, SVFR, or VFR. All flights are subject to ATC clearance. Aircraft operating under IFR and SVFR are separated from each other, and are given traffic information in respect of VFR flights. Flights operating under VFR are given traffic information in respect of all other flights.
  • Class E: Operations may be conducted under IFR, SVFR, or VFR. Aircraft operating under IFR and SVFR are separated from each other, and are subject to ATC clearance. Flights under VFR are not subject to ATC clearance. As far as is practical, traffic information is given to all flights in respect of VFR flights.
  • Class F: Operations may be conducted under IFR or VFR. ATC separation will be provided, so far as practical, to aircraft operating under IFR. Traffic Information may be given as far as is practical in respect of other flights.
  • Class G: Operations may be conducted under IFR or VFR. ATC separation is not provided. Traffic Information may be given as far as is practical in respect of other flights.

Classes A-E are referred to as controlled airspace. Classes F and G are uncontrolled airspace.

As of 2004, ICAO is considering a proposal to reduce the number of airspace classifications to three, which roughly correspond to the current classes C, E and G.

Use of airspace classes

Each national aviation authority determines how it uses the ICAO classifications in its airspace design. In some countries, the rules are modified slightly to fit the airspace rules and air traffic services that existed before the ICAO standardisation.

United States

The U.S. adopted a slightly modified version of the ICAO system on September 16, 1993, when regions of airspace designated according to older classifications were converted wholesale. The exceptions are some Terminal Radar Service Areas (TRSA), which have special rules and still exist in a few places.

With some exceptions, Class A airspace is applied to all airspace between 18,000 feet (5,500 m) and Flight Level 600 (approximately 60,000 ft). Above FL600, the airspace reverts to Class E (Reference Order 7400.9P, Subpart E). The transition altitude (see Flight level) is also consistently 18,000 feet (5,500 m). All operations in US Class A airspace must be conducted under IFR. SVFR flight in Class A airspace is prohibited.

Class B airspace is used around major airports, in a funnel shape that is designed to contain arriving and departing commercial air traffic operating under IFR, up to 10,000 feet (3,000 m) above MSL (12,000 feet above Denver, Colorado). Class C airspace is used around airports and military air bases with a moderate traffic level. Class D is used for smaller airports that have a control tower. The U.S. uses a modified version of the ICAO class C and D airspace, where only radio contact with ATC rather than an ATC clearance is required for VFR operations.

Other controlled airspace is designated as Class E - this includes a large part of the lower airspace. Class E airspace exists in many forms. It can serve as a surface-based extension to Class D airspace to accommodate IFR approach/departure procedure areas. Class E airspace can be designated to have a floor of 700' AGL (above ground level) or 1,200' AGL. Class E airspace exists above Class G surface areas from 14,500' MSL (mean sea level) to 18,000 MSL. Federal airways from 1,200 AGL to 18,000 MSL within 4 miles (6 km) of the centerline of the airway is designated Class E airspace. Airspace at any altitude over 60,000' (the ceiling of Class A airspace) is designated Class E airspace.

The U.S. does not use ICAO Class F.

Class G airspace (Uncontrolled) is mostly used for a small layer of airspace near the ground, but there are larger areas of Class G airspace in remote regions.

from JROTC.ORG

Class B Airspace

ClassBAir.gif (2412 bytes)

Class C Airspace

ClassCAir.gif (3670 bytes)

Class D Airspace

ClassDAir.gif (3676 bytes)

Class E Airspace

Generally, if the airspace is not Class A, Class B, Class C, or Class D, and it is controlled airspace, it is Class E airspace. Class E airspace extends upward from either the surface or a designated altitude to an overlying or adjacent controlled airspace. Unless designated at a lower altitude, Class E airspace begins at 14,500 feet MSL over the United States. Class E airspace does not include the airspace at 18,000 feet MSL and above.

Class G Airspace

All airspace not designated as Class A, Class B, Class C, Class D, or Class E airspace, is deemed to be uncontrolled airspace, and is designated as Class G airspace.

Special Use Airspace

Each sectional chart in the US. contains a listing of all the special use airspace contained within that chart. The listing also identifies the controlling agency. Special use airspace has seven categories:

Prohibited Area (P)

Prohibited airspace is a portion of airspace within which aircraft operations are explicitly prohibited. Permission to penetrate a Prohibited Area is not granted.

Restricted Area (R)

This is special use airspace with restricted access. Restricted Areas denote the existence of unusual aircraft hazards, e.g., missile and gunnery activity. Penetration of Restricted Areas may be granted at times by the controlling agency

Warning Area (W)

Warning Areas exist in airspace overlying international waters. These areas lie beyond the three-mile limit offshore. Warning areas typically contain hazards similar to those found in Restricted Areas.

Military Operations Area (MOA)

MOAs are areas of defined vertical and lateral boundaries established for military training activities. Permission is not required prior to penetrating an MOA but pilots should exercise extreme caution. Pilots should contact the nearest FAA Flight Service Station to obtain information regarding current activities in an MOA prior to departure.

Alert Area (A)

Alert Areas typically contain a high volume of pilot training or unusual type of aerial activity. Flight within Alert Areas is not restricted, but pilots should exercise extreme caution. Pilots are fully responsible for collision avoidance in Alert Areas.

Air Defense Identification Zone (ADIZ)

Air Defense Identification Zones have been established to facilitate early identification of all aircraft entering into or operating in the vicinity of the U.S. All aircraft entering domestic airspace must provide for identification prior to entry

Temporary Flight Restrictions

Temporary flight restrictions are usually issued by NOTAM to protect persons/property from a hazard associated with events on the ground - such as toxic spills., volcanic eruptions, forest fires, or any event that might attract sightseers -when low flying aircraft would magnify that hazard.

Canada

Canada generally follows the United States in application of airspace with some differences. For example, Canadian class "C" airspace is procedurally equivalent to United States class "B" airspace. Additionally, the term "Class F" is used for Special Use Airspace, this includes Advisory airspace and Restricted airspace.

Germany

In Germany, Classes A and B are not used at all. Class C is used for Airspace above Flight Level (FL) 100 (or FL 130 near the Alps) up to FL 660. Airspace is divided into lower airspace below FL 245 and upper airspace above FL 245.

  • Class A is not used.
  • Class B is not used.
  • Class C is used for controlled zones above and around airports and airspace above FL 100 (or FL 130 near the Alps) up to FL 660.
  • Class D is used for controlled zones or above and around airspace class C designated zones where CVFR is not necessary.
  • Class E is used for airspace between usually 2,500 ft (760 m). AGL (around airports 1,000 ft (300 m). or 1700 ft. AGL) and FL 100.
  • Class F is used for IFR-Flight in uncontrolled airspace.
  • Class G is used below 2,500 ft (760 m). AGL (around airports below 1,000 ft (300 m). AGL, then rises via a step at 1,700 ft (520 m). to 2,500 ft (760 m). AGL)

Lithuania

In Lithuania, Classes A and B are generally not used at all. Classes C and D are used in the following areas of controlled airspace of the Republic of Lithuania:

  • in control zones (CTR);
  • in terminal control areas (TMA);
  • in control area (CTA);
  • in upper control area (UTA).

Source: Airfield Guide Lithuania, 29 SEP 2005, ENR 1.1-1

United Kingdom

Class A

  • All airways up to FL 195 with the exception of airways lying within the Belfast CTR/TMA and the Scottish TMA.
  • The Terminal Control Areas (TMAs) around London and Manchester.
  • The London Control Zone around Heathrow and the Channel Islands Control Zone; these areas are thus off-limits to VFR flights (however Special VFR is used as a get-around for this).
  • The CTAs of Daventry, Cotswold and Worthing.

Class C

All UK airspace between FL 195 and FL 660. N.b: The Upper Flight Information Region (UIR) boundary begins at FL 245

Class D

Class E

Parts of the Belfast and Scottish TMAs and a small part of the Durham Tees Valley CTR.

Class F

"Advisory Routes" (ADRs): regularly used routes similar to airways but where traffic levels are not high enough to warrant establishment of an airway.

Class G

All remaining airspace, comprising by far the largest part of the airspace below FL 195. The UK is unusual in that IFR flight in Class G airspace is relatively common and ATC units may provide an "as far as is practical" form of separation between some such flights.

A clearance is not required for VFR flights within Class E airspace, however pilots are strongly advised to contact the appropriate ATSU.

In addition the UK has a couple of special classes of airspace that do not fall within the ICAO classes:

Aerodrome Traffic Zones (ATZ) are zones around an airport with a radius of 2 nm or 2.5 nm, extending from the surface to 2,000 ft (600 m) AAL. Aircraft within an ATZ must obey the instructions of the tower controller (if present), or must make radio contact with the Information Officer or Air/Ground radio unit on the airport before entering the zone (in the case of an uncontrolled airfield), or must obey ground signals if non-radio.[1]

Military Air Traffic Zones (MATZ) are zones from the surface to 3,000 ft (900 m) AAL set up around military air bases in class G airspace. Military aircraft treat these as if they are controlled airspace; civilian traffic is advised but not obliged to do the same.

Australia

Australia has adopted a civil airspace system based on the United States National Airspace System (NAS):

  • Class A is used above FL 180 along the populated coastal areas, and above FL 245 elsewhere.
  • Class B is not used.
  • Class C is used in a 360° funnel shape in the Terminal Control Zones of the major international airports, extending up to the base of the Class A, generally at FL 180 over these airports. It also overlays Class D airspace at smaller airports.
  • Class D is used for the Terminal Control Zones of medium sized airports, extending from the surface up to 4,500 feet (1,370 m). Above this, Class C airspace is used, although generally only in a sector, and not 360° around the airport.
  • Class E is used along the populated coastal areas, from 8,500 feet (2,590 m) to the base of the overlying Class A or Class C airspace.
  • Class F is not used.
  • Class G is used wherever other classes are not - almost always from the surface to the base of the overlying Class A, C, D or E airspace.

In addition, Australia has a non-standard class of airspace for use at the capital city general aviation airports, called a General Aviation Airport Procedures Zone (GAAP Zone). A control tower provides procedural clearances for all aircraft inside the zone. Additionally, any aircraft operating within 5 nm of the zone must obtain a clearance. VFR aircraft arrive and depart using standard arrival and departure routes, while instrument arrival and departure procedures are published for IFR operations. During VMC, IFR aircraft are not provided with full IFR services. During IMC, or marginal VMC, VFR operations are restricted in order to facilitate full IFR service for IFR aircraft.

Airspace classes and VFR

Authorities use the ICAO definitions to derive additional rules for VFR cloud clearance, visibility, and equipment requirements.

For example, consider Class E airspace. An aircraft operating under VFR may not be in communication with ATC, so it is imperative that its pilot be able to see and avoid other aircraft (and vice versa). That includes IFR flights emerging from a cloud, so the VFR flight must keep a designated distance from the edges of clouds above, below, and laterally, and must maintain at least a designated visibility, to give the two aircraft time to observe and avoid each other. The low-level speed limit of 250 knots does not apply above 10,000 feet (3,000 m), so the visibility requirements are higher.

On the other hand, in Class B airspace, separation is provided by ATC to all flights. Now the VFR flight only needs to see where it is going, so visibility requirements are reduced and there is no designated minimum distance from clouds.

Similar considerations determine whether a VFR flight must use a two-way radio and/or a transponder.

Special use airspace

Each national authority designates areas of special use airspace (SUA), primarily for reasons of national security. This is not a separate classification from the ATC-based classes; each piece of SUA is contained in one or more zones of letter-classed airspace.

SUAs range in restrictiveness, from areas where flight is always prohibited except to authorized aircraft, to areas that are not charted but are used by military for potentially hazardous operations (in this case, the onus is on the military personnel to avoid conflict). Refer to the external links for more specific details.

References

  1. ^ Godwin, Peter (1987-2004). The Air Pilot's Manual: Aviation Law And Meteorolgy. Cranfield, England: Air Pilot Publishing Ltd.

External links