Showing posts with label forces and equilibrium. Show all posts
Showing posts with label forces and equilibrium. Show all posts

Tuesday, August 12, 2008

Longitudinal static stability

From Wikipedia, the free encyclopedia

Longitudinal static stability is important in determining whether an aircraft will be able to fly as intended.

Static stability

As any vehicle moves it will be subjected to minor changes in the forces that act on it, and in its speed.

  • If such a change causes further changes that tend to restore the vehicle to its original speed and orientation, without human or machine input, the vehicle is said to be statically stable. The aircraft has positive stability.
  • If such a change causes further changes that tend to drive the vehicle away from its original speed and orientation, the vehicle is said to be statically unstable. The aircraft has negative stability.
  • If such a change causes no tendency for the vehicle to be restored to its original speed and orientation, and no tendency for the vehicle to be driven away from its original speed and orientation, the vehicle is said to be neutrally stable. The aircraft has zero stability.

For a vehicle to possess positive static stability it is not necessary for its speed and orientation to return to exactly the speed and orientation that existed before the minor change that caused the upset. It is sufficient that the speed and orientation do not continue to diverge but undergo at least a small change back towards the original speed and orientation

Longitudinal stability

The longitudinal stability of an aircraft, including an unmanned aerial vehicle, refers to the aircraft's stability in the pitching plane - the plane which describes the position of the aircraft's nose in relation to its tail and the horizon. (Other stability modes are directional stability and lateral stability.)

If an aircraft is longitudinally stable, a small increase in angle of attack will cause the pitching moment on the aircraft to change so that the angle of attack decreases. Similarly, a small decrease in angle of attack will cause the pitching moment to change so that the angle of attack increases.

The pilot's task

The pilot of an aircraft with positive longitudinal stability, whether it is a human pilot or an autopilot, has an easy task to fly the aircraft and maintain the desired pitch attitude which, in turn, makes it easy to control the speed, angle of attack and fuselage angle relative to the horizon. The pilot of an aircraft with negative longitudinal stability has a more difficult task to fly the aircraft. It will be necessary for the pilot devote more effort, make more frequent inputs to the elevator control, and make larger inputs, in an attempt to maintain the desired pitch attitude.

Most successful aircraft have positive longitudinal stability, providing the aircraft's center of gravity lies within the approved range. Some acrobatic and combat aircraft have low-positive or neutral stability to provide high maneuverability. Some advanced aircraft have a form of low-negative stability called relaxed stability to provide extra-high maneuverability.

Center of gravity

The longitudinal static stability of an aircraft is significantly influenced by the position of the center of gravity of the aircraft. As the center of gravity moves forward the moment arm between the horizontal stabilizer increases and the longitudinal static stability of the aircraft also increases. As the center of gravity moves aft, the longitudinal static stability of the aircraft decreases.

The limitations specified for an aircraft type and model include limitations on the most forward position, and the most aft position, permitted for the center of gravity. No attempt should be made to fly an aircraft if its center of gravity is outside the approved range, or will move outside the approved range during the flight.

Analysis

Near the cruise condition most of the lift is generated by the wings, with ideally only a small amount generated by the fuselage and tail. We may analyse the longitudinal static stability by considering the aircraft in equilibrium under wing and tail lift, and weight. The moment equilibrium condition is called trim, and we are generally interested in the longitudinal stability of the aircraft about this trim condition.

Image:AirStability.svg

Equating forces in the vertical direction:

W = Lw + Lt

where W is the weight, Lw is the wing lift and Lt is the tail lift.

For a symmetrical airfoil at low angle of attack, the wing lift is proportional to the angle of attack:

L_w=qS_w\frac{\partial C_L}{\partial \alpha} (\alpha-\alpha_0)

where Sw is the wing area CL is the (wing) lift coefficient, α is the angle of attack. The term α0 is included to account for camber, which results in lift at zero angle of attack. Finally q is the dynamic pressure:

q=\frac{1}{2}\rho v^2

where ρ is the air density and v is the speed.

Trim

The tailplane is usually a symmetrical airfoil, so its lift is proportional to angle of attack, but in general, there will also be an elevator deflection to maintain moment equilibrium (trim). In addition, the tail is located in the flow field of the main wing, and consequently experiences a downwash, reducing the angle of attack at the tailplane.

For a statically stable aircraft of conventional (tail in rear) configuration, the tailplane lift typically acts downward. In canard aircraft, both fore and aft planes are lifting surfaces. The fundamental requirement for static stability is that the coefficient of lift of the fore surface be greater than that of the aft surface; but even this general statement obviously does not apply to tailless aircraft. Violations of this basic principle are exploited in some high performance combat aircraft to enhance agility; artificial stability is supplied by electronic means.

The tail lift is, therefore:

 L_t=q S_t\left(\frac{\partial C_l}{\partial \alpha}\left(\alpha-\frac{\partial \epsilon}{\partial \alpha}\alpha\right)+\frac{\partial C_l}{\partial \eta}\eta\right)

where St is the tail area, Cl is the tail lift coefficient, η is the elevator deflection, and ε is the downwash angle.

Note that for a rear-tail configuration, the aerodynamic loading of the horizontal stabilizer (in N.m − 2) is less than that of the main wing, so the main wing should stall before the tail, ensuring that the stall is followed immediately by a reduction in angle of attack on the main wing, promoting recovery from the stall. (In contrast, in a canard configuration, the loading of the horizontal stabilizer is greater than that of the main wing, so that the horizontal stabilizer stalls before the main wing, again promoting recovery from the stall.)

There are a few classical cases where this favourable response was not achieved, notably some early T-tail jet aircraft. In the event of a very high angle of attack, the horizontal stabilizer became immersed in the downwash from the fuselage, causing excessive download on the stabilizer, increasing the angle of attack still further. The only way an aircraft could recover from this situation was by jettisoning tail ballast or deploying a special tail parachute. The phenomenon became known as 'deep stall'.

Taking moments about the center of gravity, the net nose-up moment is:

M = Lwxg − (lt − xg)Lt

where xg is the location of the center of gravity behind the aerodynamic center of the main wing, lt is the tail moment arm. For trim, this moment must be zero. For a given maximum elevator deflection, there is a corresponding limit on center of gravity position at which the aircraft can be kept in equilibrium. When limited by control deflection this is known as a 'trim limit'. In principle trim limits could determine the permissible forwards and rearwards shift of the centre of gravity, but usually it is only the forward cg limit which is determined by the available control, the aft limit is usually dictated by stability.

In a missile context 'trim limit' more usually refers to the maximum angle of attack, and hence lateral acceleration which can be generated.

Static stability

The nature of stability may be examined by considering the increment in pitching moment with change in angle of attack at the trim condition. If this is nose up, the aircraft is longitudinally unstable; if nose down it is stable. Differentiating the moment equation with respect to α:

\frac{\partial M}{\partial \alpha}=x_g\frac{\partial L_w}{\partial \alpha}-(l_t-x_g)\frac{\partial L_t}{\partial \alpha}

Note: \frac{\partial M}{\partial \alpha} is a stability derivative.

It is convenient to treat total lift as acting at a distance h ahead of the centre of gravity, so that the moment equation may be written:

M = h(Lw + Lt)

Applying the increment in angle of attack:

\frac{\partial M}{\partial \alpha}=h\left(\frac{\partial L_w}{\partial \alpha}+\frac{\partial L_t}{\partial \alpha}\right)

Equating the two expressions for moment increment:

h=x_g-l_t\frac {\frac {\partial L_t}{\partial \alpha}}{\frac{\partial L_w}{\partial \alpha}+\frac{\partial L_t}{\partial \alpha}}

The denominator of the second term is dominated by the wing lift, so the tail lift term can be ignored, yielding:

h=x_g-c\left(1-\frac{\partial \epsilon}{\partial \alpha}\right)\frac{\frac{\partial C_l}{\partial \alpha}}{\frac{\partial C_L}{\partial \alpha}}\frac{l_t S_t}{c S_w}

Where c is the mean aerodynamic chord of the main wing. The term:

V=\frac{l_t S_t}{c S_w}

is known as the tail volume ratio. Its rather complicated coefficient, according to Piercy, has values in the range 0.5 to 0.65 for typical configurations. Hence the expression for h may be written more compactly, though somewhat approximately, as:

h = xg − 0.5cV

h is known as the static margin. For stability it must be negative. (However, for consistency of language, the static margin is sometimes taken as − h, so that positive stability is associated with positive static margin.)

Neutral point

A mathematical analysis of the longitudinal static stability of a complete aircraft (including horizontal stabilizer) yields the position of center of gravity at which stability is neutral. This position is called the neutral point. (The larger the area of the horizontal stabilizer, and the greater the moment arm of the horizontal stabilizer about the aerodynamic center, the further aft is the neutral point.)

The static center of gravity margin (c.g. margin) or static margin is the distance between the center of gravity (or mass) and the neutral point. It is usually quoted as a percentage of the Mean Aerodynamic Chord. The center of gravity must lie ahead of the neutral point for positive stability (negative static margin). If the center of gravity is behind the neutral point, the aircraft is longitudinally unstable (the static margin is positive), and active inputs to the control surfaces are required to maintain stable flight. Ultimately, the position of the center of gravity relative to the neutral point determines the stability, control forces, and controllability of the vehicle.

For a tailless aircraft V = 0, the neutral point coincides with the aerodynamic center, and so for longitudinal static stability the center of gravity must lie ahead of the aerodynamic center.

See also

References

  • Clancy, L.J. (1975), Aerodynamics, Chapter 16, Pitman Publishing Limited, London. ISBN 0 273 01120 0
  • Hurt, H.H. Jr, (1960), Aerodynamics for Naval Aviators Chapter 4, A National Flightshop Reprint, Florida.
  • Irving, F.G. (1966), An Introduction to the Longitudinal Static Stability of Low-Speed Aircraft, Pergamon Press, Oxford, UK.
  • McCormick, B.W., (1979), Aerodynamics, Aeronautics, and Flight Mechanics, Chapter 8, John Wiley and Sons, Inc., New York NY.
  • Perkins, C.D. and Hage, R.E., (1949), Airplane Performance Stability and Control, Chapter 5, John Wiley and Sons, Inc., New York NY.
  • Piercy, N.A.V. (1944), Elementary Aerodynamics, The English Universities Press Ltd., London.

Saturday, July 26, 2008

Buoyancy

From Wikipedia, the free encyclopedia

The forces at work in buoyancy
The forces at work in buoyancy

In physics, buoyancy (BrE IPA: ˈbɔɪənsi) is the upward force on an object produced by the surrounding liquid or gas in which it is fully or partially immersed, due to the pressure difference of the fluid between the top and bottom of the object. The net upward buoyancy force is equal to the magnitude of the weight of fluid displaced by the body. This force enables the object to float or at least to seem lighter. Buoyancy is important for many vehicles such as boats, ships, balloons, and airships, and plays a role in diverse natural phenomena such as sedimentation.

Archimedes' principle

It is named after Archimedes of Syracuse, who first discovered this law. Vitruvius (De architectura IX.9–12) recounts the famous story of Archimedes making this discovery while in the bath (for which see eureka) but the actual record of Archimedes' discoveries appears in his two-volume work, On Floating Bodies. The ancient Chinese child prodigy Cao Chong also applied the principle of buoyancy in order to measure the accurate weight of an elephant, as described in the Sanguo Zhi.

This is true only as long as one can neglect the surface tension (capillarity) acting on the body.[1]

The weight of the displaced fluid is directly proportional to the volume of the displaced fluid (specifically if the surrounding fluid is of uniform density). Thus, among objects with equal masses, the one with greater volume has greater buoyancy.

Suppose a rock's weight is measured as 10 newtons when suspended by a string in a vacuum. Suppose that when the rock is lowered by the string into water, it displaces water of weight 3 newtons. The force it then exerts on the string from which it hangs will be 10 newtons minus the 3 newtons of buoyant force: 10 − 3 = 7 newtons. This same principle even reduces the apparent weight of objects that have sunk completely to the sea floor, such as the sunken battleship USS Arizona at Pearl Harbor, Hawaii. It is generally easier to lift an object up through the water than it is to finally pull it out of the water. And, it also works with boiled eggs, salt, and fresh water.

The density of the immersed object relative to the density of the fluid is easily calculated without measuring any volumes:

 \frac { \mbox{Density of Object}} { \mbox {Density of Fluid} } = \frac { \mbox{Weight} } { \mbox{Weight} - \mbox{Apparent immersed weight} }\,

Forces and equilibrium

Pressure increases with depth below the surface of a liquid. Any object with a non-zero vertical depth will see different pressures on its top and bottom, with the pressure on the bottom being higher. This difference in pressure causes the upward buoyancy force.

The magnitude of buoyant force may be appreciated from the following argument. Consider any volume of liquid of arbitrary shape and volume V\,. The body of liquid being in equilibrium, the net force the surrounding body of liquid exerts on it must be equal to the weight of that volume of liquid and directed opposite to gravitational force. That is, of magnitude:

\rho V g \, , where \rho\, is the density of the liquid, V\, is the volume of the body of liquid , and g\, the standard gravity (\scriptstyle\approx\, -9.8 N/kg on Earth)

Now, if we replace this volume of liquid by a solid body of the exact same shape, the force the surrounding body of liquid exerts on it must be exactly the same as above. In other words the "buoyant force" on a submerged body is directed in the opposite direction to gravity and is equal in magnitude to : \rho V g \, ( note that here V\, is the volume of fluid displaced by the body )

The net force on the object is thus the net force of buoyancy and the object's weight

F_\mathrm{net} = mg - \rho V g \,

If the buoyancy of an (unrestrained and unpowered) object exceeds its weight, it tends to rise. An object whose weight exceeds its buoyancy tends to sink.

It is common to define a buoyant mass mb that represents the effective mass of the object with respect to gravity

m_{b} = m_{\mathrm{o}} \cdot \left( 1 - \frac{\rho_{\mathrm{f}}}{\rho_{\mathrm{o}}} \right)\,

where m_{\mathrm{o}}\, is the true (vacuum) mass of the object, whereas ρo and ρf are the average densities of the object and the surrounding fluid, respectively. Thus, if the two densities are equal, ρo = ρf, the object appears to be weightless. If the fluid density is greater than the average density of the object, the object floats; if less, the object sinks.

Compressive fluids

The atmosphere's density depends upon altitude. As an airship rises in the atmosphere, its buoyancy reduces as the density of the surrounding air reduces. The density of water is essentially constant: as a submarine expels water from its buoyancy tanks (by pumping them full of air) it rises because its volume stays the same (the volume of water it displaces if it is fully submerged) while its weight is decreased.

Compressible objects

As a floating object rises or falls the forces external to it change and, as all objects are compressible to some extent or another, so does the object's volume. Buoyancy depends on volume and so an object's buoyancy reduces if it is compressed and increases if it expands.

If an object at equilibrium has a compressibility less than that of the surrounding fluid, the object's equilibrium is stable and it remains at rest. If, however, its compressibility is greater, its equilibrium is then unstable, and it rises and expands on the slightest upward perturbation, or falls and compresses on the slightest downward perturbation.

Submarines rise and dive by filling large tanks with seawater. To dive, the tanks are opened to allow air to exhaust out the top of the tanks, while the water flows in from the bottom. Once the weight has been balanced so the overall density of the submarine is equal to the water around it, it has neutral buoyancy and will remain at that depth. Normally, precautions are taken to ensure that no air has been left in the tanks. If air were left in the tanks and the submarine were to descend even slightly, the increased pressure of the water would compress the remaining air in the tanks, reducing its volume. Since buoyancy is a function of volume, this would cause a decrease in buoyancy, and the submarine would continue to descend.

The height of a balloon tends to be stable. As a balloon rises it tends to increase in volume with reducing atmospheric pressure, but the balloon's cargo does not expand. The average density of the balloon decreases less, therefore, than that of the surrounding air. The balloon's buoyancy reduces because the weight of the displaced air is reduced. A rising balloon tends to stop rising. Similarly a sinking balloon tends to stop sinking.

Density

If the weight of an object is less than the weight of the fluid the object would displace if it were fully submerged, then the object has an average density less than the fluid and has a buoyancy greater than its weight. If the fluid has a surface, such as water in a lake or the sea, the object will float at a level where it displaces the same weight of fluid as the weight of the object. If the object is immersed in the fluid, such as a submerged submarine or air in a balloon, it will tend to rise. If the object has exactly the same density as the fluid, then its buoyancy equals its weight. It will tend neither to sink nor float. An object with a higher average density than the fluid has less buoyancy than weight and it will sink. A ship floats because although it is made of steel, which is more dense than water, it encloses a volume of air and the resulting shape has an average density less than that of the water.

References

  1. ^ "Floater clustering in a standing wave: Capillarity effects drive hydrophilic or hydrophobic particles to congregate at specific points on a wave" (PDF) (2005-06-23).

See also

External links

Look up Buoyancy in
Wiktionary, the free dictionary.