Showing posts with label lift. Show all posts
Showing posts with label lift. Show all posts

Thursday, July 24, 2008

Airfoil

From Wikipedia, the free encyclopedia

Various components of the airfoil.
Various components of the airfoil.

An airfoil (in American English) or (aerofoil in British English) is the shape of a wing or blade (of a propeller, rotor or turbine) or sail as seen in cross-section.

An airfoil-shaped body moved through a fluid produces a force perpendicular to the motion called lift. Subsonic flight airfoils have a characteristic shape with a rounded leading edge, followed by a sharp trailing edge, often with asymmetric camber. Airfoils designed with water as the working fluid are also called hydrofoils.

Introduction

A fixed-wing aircraft's wings, horizontal, and vertical stabilizers are built with airfoil-shaped cross sections, as are helicopter rotor blades. Airfoils are also found in propellers, fans, compressors and turbines. Sails are also airfoils, and the underwater surfaces of sailboats, such as the centerboard and keel, are similar in cross-section and operate on the same principles as airfoils. Swimming and flying creatures and even many plants and sessile organisms employ airfoils; common examples being bird wings, the bodies of fishes, and the shape of sand dollars. An airfoil-shaped wing can create downforce on an automobile or other motor vehicle, improving traction.

Any object with an angle of attack in a moving fluid, such as a flat plate, a building, or the deck of a bridge, will generate an aerodynamic force (called lift) perpendicular to the flow. Airfoils are more efficient lifting shapes, able to generate more lift (up to a point), and to generate lift with less drag.

Lift and Drag curves for a typical airfoil
Lift and Drag curves for a typical airfoil

A lift and drag curve obtained in wind tunnel testing is shown on the right. The curve represents an airfoil with a positive camber so some lift is produced at zero angle of attack. With increased angle of attack, lift increases in a roughly linear relation, called the slope of the lift curve. At about eighteen degrees this airfoil stalls and lift falls off quickly beyond that. Drag is least at a slight negative angle for this particular airfoil, and increases rapidly with higher angles.

Airfoil design is a major facet of aerodynamics. Various airfoils serve different flight regimes. Asymmetric airfoils can generate lift at zero angle of attack, while a symmetric airfoil may better suit frequent inverted flight as in an aerobatic aeroplane. In the region of the ailerons and on near a wingtip a symmetric airfoil can be used to increase the range of angle of attacks to avoid spin-stall. Ailerons itself are not cut into the airfoil, but extend it. Thus a large range of angles can be used without boundary layer separation. Subsonic aeroils have a round leading edge, which is naturally insensitive to the angle of attack. For intermediate Reynolds numbers already before maximum thickness boundary layer separation occurs for a circular shape, thus the curvature is reduced going from front to back and the typical wing shape is retrieved. Supersonic airfoils are much more angular in shape and can have a very sharp leading edge, which - as explained in the last sentence - is very sensitive to angle of attack. A supercritical airfoil has its maximum thickness close to the leading edge to have a lot of length to slowly shock the supersonic flow back to subsonic speeds. Generally such transonic airfoils and also the supersonic airfoils have a low camber to reduce drag divergence. Movable high-lift devices, flaps and sometimes slats, are fitted to airfoils on almost every aircraft. A trailing edge flap acts similar to an aileron, with the difference that it can be retracted partially into the wing if not used (and some flaps even make the plane a biplane if used). A laminar flow wing has a maximum thickness in the middle camber line. Analysing the Navier-Stokes equations in the linear regime shows that a negative pressure gradient along the flow has the same effect as reducing the speed. So with the maximum camber in the middle, maintaining a laminar flow over a larger percentage of the wing at a higher cruising speed is possible. Of course, with rain or insects on the wing or for jetliner like speeds this does not work. Since such a wing stalls more easily, this airfoil is not used on wingtips (spin-stall again).

Schemes have been devised to describe airfoils — an example is the NACA system. Various ad-hoc naming systems are also used. An example of a general purpose airfoil that finds wide application, and predates the NACA system, is the Clark-Y. Today, airfoils are designed for specific functions using inverse design programs such as PROFIL, XFOIL and AeroFoil[1]. X-foil is an online program created by Mark Drela that will design and analyze subsonic isolated airfoils[2]. Modern aircraft wings may have different airfoil sections along the wing span, each one optimized for the conditions in each section of the wing.

An airfoil designed for winglets (PSU 90-125WL)
An airfoil designed for winglets (PSU 90-125WL)

Airfoil terminology

The various terms related to airfoils are defined below:[1]

  • The mean camber line is a line drawn midway between the upper and lower surfaces.
  • The chord line is a straight line connecting the leading and trailing edges of the airfoil, at the ends of the mean camber line.
  • The chord is the length of the chord line and is the characteristic dimension of the airfoil section.
  • The maximum thickness and the location of maximum thickness are expressed as a percentage of the chord.
  • For symmetrical airfoils both mean camber line and chord line pass from centre of gravity of the airfoil and they touch at leading and trailing edge of the airfoil.
  • The is the chord wise length about which the pitching moment is independent of the lift coefficient and the angle of attack.
  • The center of pressure is the chord wise location about which the pitching moment is zero.
An airfoil section is nicely displayed at the tip of this Denney Kitfox aircraft (G-FOXC), built in 1991.
An airfoil section is nicely displayed at the tip of this Denney Kitfox aircraft (G-FOXC), built in 1991.

Thin airfoil theory

A simple mathematical theory of two-dimensional (i.e. with infinite span) thin airfoils was devised by Ludwig Prandtl and others in the 1920s.

The airfoil is modeled as a thin lifting mean-line (camber line). The mean-line, y(x), is considered to produce a distribution of vorticity γ(s) along the line, s. By the Kutta condition, the vorticity is zero at the trailing edge. Since the airfoil is thin, x (chord position) can be used instead of s, and all angles can be approximated as small.

From the Biot-Savart law, this vorticity produces a flow field w(s) where

w(x) = \frac{1} {(2 \pi)} \int_{0}^{c} \frac {\gamma (x')}{(x-x')} dx'

where x is the location at which induced velocity is produced, x' is the location of the vortex element producing the velocity and c is the chord length of the airfoil.

Since there is no flow normal to the curved surface of the airfoil, w(x) balances that from the component of main flow V which is locally normal to the plate - the main flow is locally inclined to the plate by an angle α − dy / dx. That is

V . (\alpha - dy/dx) = w(x) = \frac{1} {(2 \pi)} \int_{0}^{c} \frac {\gamma (x')}{(x-x')} dx'

This integral equation can by solved for γ(x), after replacing x by

\ x = c(1 - cos (\theta ))/2 ,

as a Fourier series in Ansin(nθ) with a modified lead term A0(1 + cos(θ)) / sin(θ)

That is \frac{\gamma(\theta)} {(2V)} = A_0 \frac {(1+cos(\theta))} {sin(\theta)} + \sum  A_n . sin (n \theta))

(These terms are known as the Glauert integral).

The coefficients are given by A_0 = \alpha - \frac {1}{\pi} \int_{0}^{\pi} ((dy/dx) . d\theta

and A_n = \frac {2}{\pi} \int_{0}^{\pi} cos (n \theta) (dy/dx) . d\theta

By the Kutta–Joukowski theorem, the total lift force F is proportional to

 \rho V \int_{0}^{c} \gamma (x). dx

and its moment M about the leading edge to  \rho V \int_{0}^{c} x.\gamma (x) . dx

The calculated Lift coefficient depends only on the first two terms of the Fourier series, as

 \ C_L = 2 \pi (A_0 + A_1/2)

The moment M about the leading edge depends only on A0,A1 and A2 , as

 \ C_M = - 0.5 \pi (A_0+A_1-A_2/2)

The moment about the 1/4 chord point will thus be,

 \ C_M(1/4c) = - \pi /4 (A_1 - A_2) .

From this it follows that the center of pressure is aft of the 'quarter-chord' point 0.25 c, by

 \ \Delta x /c = \pi /4 ((A_1-A_2)/C_L)

The aerodynamic center, AC, is at the quarter-chord point. The AC is where the pitching moment M' does not vary with angle of attack, i.e.

 \frac { \partial (C_{M'}) }{ \partial (C_L)} = 0

References (thin airfoil theory)

  1. http://www.desktopaero.com/appliedaero/airfoils1/tatderivation.html
  2. http://www.aeromech.usyd.edu.au/aero/thinaero/
  3. Batchelor G K (1967), An Introduction to Fluid Dynamics, Cambridge UP, pp467-471

See also

External links

References

  1. ^ Hurt, H. H., Jr. [1960] (January 1965). Aerodynamics for Naval Aviators. U.S. Government Printing Office, Washington D.C.: U.S. Navy, Aviation Training Division, pp. 21-22. NAVWEPS 00-80T-80.
  1. http://http://web.mit.edu/drela/Public/web/xfoil/
All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.)

Wednesday, July 16, 2008

Principles of Flight

From Wikipedia, the free encyclopedia

Flight is the process by which an object achieves sustained movement either through the air (or movement beyond earth's atmosphere, in the case of spaceflight) by aerodynamically generating lift, propulsive thrust or aerostatically using buoyancy.


The physics of flight

Lighter-than-air aircraft are able to fly without any major input of energy
Main article: Aerodynamics
There are different approaches to flight. If an object has a lower density than air, then it is buoyant and is able to rise and float in the air without using energy; a lighter than air craft is known as an aerostat. A heavier than air craft, known as an aerodyne, includes flighted animals and insects, fixed-wing aircraft and rotorcraft. Because the craft is heavier than air, it must use the force of lift to overcome its weight. The wind resistance caused by the craft moving through the air is called drag and is overcome by propulsive thrust except in the case of gliding.
Some vehicles also use thrust for flight, for example rockets and Harrier Jump Jets.

Forces for flight

Main forces on a heavier-than-air aircraft
Main article: Aerodynamics
Forces relevant to flight are[1]
Propulsive thrust: (except in gliders)
Lift: created by the reaction to an airflow
Drag: created by aerodynamic friction
Weight: (created by gravity)
Buoyancy: for lighter than air flight
These forces must be balanced for stable flight to occur.
The stabilization of flight angles (roll, yaw and pitch) and the rates of change of these can involve horizontal stabilizers (i.e. 'a tail'), ailerons and other movable aerodynamic devices which control angular stability i.e. flight attitude (which in turn affects altitude, heading).

Lift to drag ratio

Speed and drag relationships for a typical flight article
Main article: Lift to drag ratio
When lift is created by the motion of an object through the air, this deflects the air, and this is the source of lift. For sustained level flight lift must be greater than weight.
However, this lift inevitably causes some drag also, and it turns out that the efficiency of lift creation can be associated with a lift/drag ratio for a vehicle; the lift/drag ratios are approximately constant over a wide range of speeds.
Lift to drag ratios for practical aircraft vary from about 4:1 up to 60:1 or more. The lower ratios are generally for vehicles and birds with relatively short wings, and the higher ratios are for vehicles with very long wings, such as gliders.

Thrust to weight ratio
Main article: Thrust-to-weight ratio
If thrust-to-weight ratio is greater than one, then flight can occur without any forward motion.
If the thrust-to-weight ratio is greater than the lift-to-drag ratio then takeoff is possible.

Energy efficiency
To create thrust to push through the air to overcome the drag associated with lift takes energy, and different objects and creatures capable of flight vary in the efficiency of their muscles, motors and how well this translates into forward thrust.
Propulsive efficiency determines how much thrust propeller and jet engines gain from a unit of fuel

Power to weight ratio
Main article: power-to-weight ratio
All animals and devices capable of sustained flight need relatively high power to weight ratios to be able to generate enough lift and/or thrust to achieve take off.

Mechanical flight
Main article: Aviation

Mechanical flight: A Robinson R22 Beta helicopter

A Bombardier Global 5000 business jet takes off
Mechanical flight is the use of a machine to fly. These machines include airplanes, gliders, helicopters, autogyros, airships, balloons, ornithopters and spacecraft. Gliders provide unpowered flight. Another form of mechanical flight is parasailing where a parachute-like object is pulled by a boat. In an airplane, lift is created by the wings; the shape of the wings of the airplane are designed specially for the type of flight desired. There are different types of wings: tempered, semi-tempered, sweptback, rectangular, and elliptical. An aircraft wing is sometimes called an airfoil, which is a device that creates lift when air flows across it.

The study of flight
In 8th century Cordoba, Ibn Firnas studied the dynamism of flying and carried out a number of experiments. After one of his flights he fell on his back and he commented that he now understands the role played by the tail when birds alight on the ground, telling his close friends that birds normally land on the root of the tail which did not happen in that occasion, hence a reference to the missing tail[4]. Durant in his book “the story of Civilisation”, quoting Al-Makkari who mentioned that Ibn Farnas indeed constructed a flying machine[5]. However, he does not elaborate on how the machine works nor whether it was the one Ibn Farnas used nor on its destiny.
Leonardo da Vinci is one of the best-known early students of flight. He made many prototypes of parachutes wings and ornithopters.
Supersonic flight
Main article: supersonic
Supersonic flight is flight faster than the speed of sound. Supersonic flight is associated with the formation of shock waves that form a sonic boom that can be heard from the ground, and is frequently startling. This shockwave takes quite a lot of energy to create and this makes supersonic flight generally less efficient than subsonic flight at about 85% of the speed of sound.

Hypersonic flight
Main article: hypersonic
Hypersonic flight is very high speed flight where the heat generated by the compression of the air due to the motion through the air causes chemical changes to the air. Hypersonic flight is achieved by reentering spacecraft such as the Space Shuttle and Soyuz.

Religion, mythology and fiction
In religion, mythology and fiction, human or anthropomorphic characters sometimes have the ability to fly. Examples include angels in the Hebrew Bible, Daedalus in Greek mythology, and Superman in comics. Two other popular examples are Dumbo, the elephant created by Disney who use his ears to fly, and Santa Claus whose sleigh is pulled by flying reindeers. Other non-human legendary creatures, such as some dragons and Pegasus, are also depicted with an ability to fly.
The ability to fly may come from wings or other visible means of propulsion, from superhuman or god-like powers, or may simply be left unexplained.

See also

Wikimedia Commons has media related to:
Category:Flight

Look up flight in Wiktionary, the free dictionary.
Aerodynamics
Aviation
Flying and gliding animals
Aviation history
Levitation
Transvection (flying)
Aircraft

References
^ Four forces on an aeroplane
^ Averof, Michalis. "Evolutionary origin of insect wings from ancestral gills." Nature, Issue 385, volume 385, February 1997 pp. 627–630.
^ The Trumpeter Swan Society - Swan Identification
^ Al-Makkari, ed. Nafh Al-Teeb Volume 4. Dar Al-Fikre, Egypt, 1986, pp. 348–349.
^ Durant, Will. The Story of Civilisation vol. 13. New York: Simon and Schuster, 1967.

External links
See how it flies: a new spin on the perceptions, procedures, and principles of flight
'Birds in Flight and Aeroplanes' by Evoluntionary Biologist and trained Engineer John Maynard-Smith Freeview video provided by the Vega Science Trust.
The First Try of Human Flight

Retrieved from "http://en.wikipedia.org/wiki/Flight"
Categories: Aerodynamics

Hidden categories: Articles needing additional references from February 2008 All articles with unsourced statements Articles with unsourced statements since May 2008 Articles with unsourced statements since June 2008



This page was last modified on 16 July 2008, at 08:57.
All text is available under the terms of the GNU Free Documentation License. (See Copyrights for details.) Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a U.S. registered 501(c)(3) tax-deductible nonprofit charity.
Privacy policy
About Wikipedia
Disclaimers